Before panic sets in; let’s know how to repair a car cigarette lighter socket. There’s more than one reason to want your car cigarette lighter socket to work. You want to charge your mobile phone and your battery is low. You’re going on a road trip and you need the GPS to work.
A car cigarette lighter socket is useful for all types of technologies. There are cameras, GPS, gadgets, and many others. So it can be quite inconvenient and a hassle to deal with it not working.
So how do you repair it?
First things first! Let’s take a look at what could possibly be wrong with the car cigarette lighter socket.
Why Is The Cigarette Lighter Not Working?
A lot of the times to make something work, we plug in different gadgets at once. And this could have caused the cigarette lighter socket to blow its fuse. Either that or you’ve accidentally dropped a coin or something small inside the socket.
Be that as it may. Here are the top 3 reasons why your car cigarette lighter socket is not working.
- The fuse of the cigarette lighter socket is blown.
- There is a penny or a foreign object lodged in the socket. This causes a short circuit or obstruction inside.
- The socket is not getting any access to power.
What to Do About It?
Now that you know the possible causes of the problem. It’s time to inspect and review them before repairing it. You don’t need to spend big bucks on figuring out the problem. All you need is this.
Having said that here are some helpful tips.
How to Repair a Car Cigarette Lighter Socket the Right Way
#1 In case the fuse is blown
There is a way to check the fuse is with a test light. You can also use a multimeter if you have it handy. To do so, locate the lighter’s fuse in the fuse box of your vehicle. It’s situated in the passenger’s compartment. If it’s not there, then either check the engine compartment or the car’s manual.
With the help of the manual, check the correct color code for the lighter’s fuse. And locate that color in the fuse box among an array of different colors. Connect the multimeter to the lighter’s fuse.
By pining the black probe on one side and the red probe on the other.
If the multimeter beeps when you set it on, it means the fuse is working normally. If it doesn’t beep, it means it’s defective or the fuse has blown. Don’t worry, a blown fuse is very common. It just means you need to replace it immediately.
With the help of a fuse puller, gently extract the lighter’s fuse. Get the proper details for the lighter’s fuse (each car has a specific requirement). Replace the new one with the old fuse and shut the fuse box.
#2 In case there is a foreign object inside the socket
Do not use metal tools to extract the object from inside the socket. Whether it’s a morsel of food, a coin, or a toy. Avoid using screwdrivers or tweezers to remove it.
#3 In case there’s not enough power in the lighter socket
For this, you will need a voltmeter to pin in the center of the socket. It will give you a voltage reading for proper power requirements.
A good DC voltage range in a voltmeter or a multimeter is ideal. The highest voltage you can set is 20V. But what you really need from a car cigarette lighter socket is 12V.
A lighter socket comes with two sides: the interior and exterior. Pin the red probe of the lighter socket in the center of the socket. And the black probe on the outside, in the black terminal.
Start the voltmeter and check for the correct reading. If it’s 12V, this means the power’s fine. If it isn’t, then you need to do something about that.
Buying a New Car Cigarette Lighter Socket
When it’s time to buy a new socket altogether, what do you see? If the problem with your lighter socket is beyond repair. You can do either one of two things.
1. Buy a new socket, by yourself, after check your vehicle’s proper requirements.
There are plenty of components that make a lighter socket work. If it’s the lighter’s fuse that is blown, you need a new fuse and not a socket. But when you have foreign objects lodged inside the socket and have burnt, you have to install a new socket.
Though each car’s fuse requirement is unique and different. Most cars work on a 15-ampere lighter’s fuse. And as for replacing the lighter socket, a 12V 120W socket is fine.
2. Get the car cigarette lighter socket fixed, professionally.
This is where the skills of Pickering Auto Arvada come in. Sometimes, you don’t know what you’re looking for. Only a professional mechanic can look at problems that nobody else can see.
So it’s easier to do inspection and repairs. And you can get the car cigarette lighter socket checked from inside and out. This is the next best thing to do when you want the repairs done quick and effectively.
When a car’s lighter socket stops working, which happens often, don’t panic. This is one of the most common car problems. And to know how to repair a car cigarette lightweight socket is super easy.
Whether there’s a foreign object stuck or burned inside the socket. Or the cigarette lighter’s fuse is blown in the fuse box. Or that the lighter socket itself has no power. You can run a bunch of tests and repairs for it.
After you’ve done your repairs, try plugging in a different gadget first. Slide it in the socket and firmly push it to activate it. In case the gadget pops out of the socket. This means the coils of the socket are too hot. Wait for the coils to cool down a bit and try again.
Having said that, in a situation where you don’t know what you’re doing. It’s always wise to seek professional help. At Pickering Auto Arvada, we do all kinds of inspections and repairs. We know the limitations of a good and bad lighter socket. And what it can do for your car if you don’t use it correctly.